• Call Us +91 971 550 5116

Self priming Mono Block pumpPower Pack Motor

Self priming Mono Block pump

Self priming Monobloc pump is used to lift water from ground tank to upper tank in homes, flats etc as residential usage. This pump is kept outside the tank and used to lift water. The pump has high suction capacity in which it will suck water and deliver in high range as per the capacity. After several years used the pump can be very well reused by changing the spare parts manually without any risk.

Used in:

  1. Bungalows, Homes, Flats as residential purpose
  2. Garden and lawns
  3. Washing cars, bikes, machines etc


  1. Accurate design and accurate delivery
  2. High suction capacity
  3. Brass forged Impeller
  4. Mechanical seal
  5. Apple company Enameled copper wire
  6. Double shielded ball bearings
  7. Light weight easy to lift
  8. Fitted with Thermal overload protector for safety of motor
  9. Voltage : 160 to 240 V (Single Phase)
  10. TEFC Capacitor

TECHNICAL Specification:

Power Rating ( in HP) 0.5 HP / 1 HP
Power Rating (in KW) 0.37 KW / 0.75 KW
Head Range 5 – 60 M
Capacity 3000 – 300 lph
Voltage 160-240v (Single Phase)
Liquid Clean water

Material used for Construction:

Motor Body Heavy Aluminium Extruded body / Cast Iron
Impeller Forged Brass
Delivery Chamber Graded Cast Iron
Bracket, Outer Cover Graded Cast Iron
Shaft Graded AISI – 410 Stainless Steel
Core length ½ hp - 35 mm, 45 mm, 1hp – 70 mm
Stamping L.C Stamping/CRNO Stamping
Coil wire Apple company enameled copper wire
Painting Red oxide, epoxy primer will be coated initially on the graded cast iron parts as an anti-corrosive. Once it is dried completely then it is painted as the customer wished color

Performance Chart:

Self priming Mono Block pump Self priming Mono Block pump